Skip to main navigation Skip to main content Skip to page footer

New 14U AdvancedTCA Shelf, 14 Slot

Vadatech announces VT826

Henderson, NV – September 3, 2026 – VadaTech, a leading manufacturer of integrated systems and embedded boards and chassis, enabling software and application ready platforms, announces VT826.

The VT826 utilizes the most successful design in the ATCA market. The 14U chassis provides up to 14 front and RTM ATCA slots. The backplane for the VT826 is capable of 10/40/100/200/400G Dual Star topology (Mesh is available upon request). Two PEM (Power Entry Modules) are standard with options for redundancy. The front air filter is removable and an EMC mat below the card cage helps to redirect airflow. The chassis is NEBS compliant with front-to-rear airflow. The VT826 has powerful blowers above an air plenum over the card cage. If one of the four blowers are removed, the airflow within the plenum follows the path of least resistance, keeping the static pressure low. This is a critical feature to support the NEBS requirements for fan failure/removal. The 14-Slot backplane has been independently tested to ensure that it meets 10/40/100/200/400G ATCA requirements per the PICMG 3.1 R4.0 specification. The VadaTech shelf manager is standard, but other options are available. The VT826 shelf uses standard rear Power Entry Modules (PEMs) provide 150 Amp redundant and non-redundant configurations dependent on system power requirements. The input voltage is -40V to -60V. The VT826 uses 4 x 180 CFM blowers with dual IPMI for failover. Contact factory for further details. RTM (Rear Transition Module) are available per slot. The VadaTech shelf manager is based on our standard VT040 mezzanine. It incorporates the Intelligent Platform Management Interface (IPMI v2.0) and the PICMG 3.x specification on a mezzanine module are available in the chassis.

  • 19″ rackmount 14U ATCA Chassis Platform
  • 10/40/100/200/400G ATCA 14-slot backplane with Dual Star base and fabric (Full Mesh optional)
  • Conforms to latest PICMG 3.1 specification Rev. 4.0
  • Full redundancy for all FRUs
  • Split power distribution (odd slots on A1/B1, even slots on A2/B2)
  • Superior cooling for 400W/slot
  • 14 Rear Transition Module (RTM) slots

Please contact EMCOMO's sales team to discuss ordering options, system integration and technical support.

For more information contact vadatech@emcomo.de. 

 

<< back to EMCOMO Solutions News