UTC013
MTCA DC Power Module, -48V, 396W or 792W, double-width
Description:
UTC013 is a 792 W power module (available in 396 W) for use in a MTCA chassis. The power module runs at 95% efficiency when running at maximum load. This results in over 752 W available to the system. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).
The UTC013 is hot-swappable and fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MicroTCA Carrier Hubs (MCHs) as well as the Cooling Units (CUs).
Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to the MCH for any fault.
Once installed in the system the firmware is upgradable via the shelf manager. The UTC013 can be configured to power and enable the modules without the presence of an MCH.
Key Features:
- Double-module, full-size per AMC.0
- Dual DC input -36 V DC to -75 V DC 792 W (available in 396 W)
- Available in UTCA.3 conduction cooled
- Two banks of 256K Flash for redundancy
- Hot swappable
- Dual IPMI bus
- 32–bit RISC processor
- Modules can be turned on without an MCH