VPX Boards - Power Supplies
EM-P350-AC/CC Features:
- 3U VITA 62 Power Supply suitable for VPX and OpenVPX systems
- Target markets: Avionics, Space, Defense, Industrial Automation
- Air-cooled and conduction cooled version
- Air-cooled with 3U 8HP front panel, Conduction cooled 1“ pitch
- 10V – 36V continuous input voltage
- 2300V Isolation between Input /Output
- Active input EMI filtering
- Transient look ahead/cut-off technology
- 6 voltage output rails
- Pinout as per VITA 62
- 500W maximum power
- 93% typical efficiency
- No electrolytic capacitors
- -40°C to 85°C operating temperature
- Conduction cooled version with -40°C to 85°C rail temperature and no derating up to max. temperature
EM-P328-CC Features:
- 6U Form Factor
- Suitable for VME, CompactPCI, and VPX Systems
- 500 Watts Outputs Power
- >85% Efficiency
- 18 - 35 Vdc Input Range
- MIL-STD-704A/D/E/F and 1275
- EMI/RFI Filter for MIL-STD-461
- Input Transient Protection
- Input Reverse Polarity Protection
- Holdup Time
- Output Over/Undervoltage and Short Circuit Protections
- ~ACFAIL, ~SYSRST and ~SYSFAIL Control Signals
- Input/Output and Chassis Isolation
- Thermal Shutdown (with Override on request)
- External ON/OFF Control, DC Fan Output Drive and Control
- Internal BIT Status and Alarms for Voltages, Currents & Temperatures
- Metric screws for chassis wall (captive M3) and wedgelocks
- RoHS II compliant variant available
VPX599 Features:
- 3U VPX board per VITA-46
- Dual ADC 6.4 GSPS @ 12-bits or quad ADC @ 3.2 GSPS @ 12-bits utilizing the TI ADCDJ3200 (option for ADCJ2700 or ADCJ1600)
- Dual DAC (AD9162 or AD9164) 12 GSPS @ 16-bits
- Xilinx UltraScale™ XCKU115 FPGA
- 16 GB DDR-4 64-bit wide
- High-performance clock jitter cleaner
- Protocols such as PCIe, SRIO, 10GbE/40GbE, etc.are FPGA programmable
- VHDL reference design with source code
VPX516 Features:
- 3U VPX FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46/57
- Xilinx Virtex-7 690T FPGA in FFG-1761 package
- 2.5 GB of DDR3 Memory
- High-performance clock jitter cleaner
- Compatible with VadaTech and 3rd party FMCs
- Protocols such as PCIe, SRIO, 10GbE/40GbE, etc.are FPGA programmable
- VHDL reference design with source code
- Health Management through dedicated Processor
VPX645 Features:
- Multi-Terabyte (up to 16 TB) storage capacity in a 3U VPX form factor
- 3U VPX NVMe Host Bus Adapter with Full support for RAID
- Dual Core ARM A15 RAID On Chip (ROC)
- On board 8 GB of DDR4 Memory with ECC
- Hardware Engine for RAID 5 and RAID 6 acceleration
- PCIe Gen3 x8 or x4
- Health Management through dedicated Processor
VX3920 Features:
- L2/L3 non blocking 10G/40G switch
- 3U Open VPX, MOD3-SWH-2F24U module
- Air-cooled - backplane: 22x 10GBase-KR, 1x 10/100/1000Base-T user configurable front panel or backplane. Front Panel: 2x 10G SFP+
- Conduction-cooled - backplane: 24x 10GBase-KR or 6x 40GBase-KR4 or, 22x 10GBase-KR + 1x 10/100/1000Base-T
- Front panel (air-cooled only): 2x SFP+, 2x RJ45, 1x RJ11 (serial)
- Supports: VLAN, link aggregation, spanning tree
- QoS, flow control
- GRVP, GMRP function managed, port mirroring
- Out of band management
- 5V only design, 45W maximum
C680 Features:
- Rugged 3U VPX Single-Slot Ethernet Switchh
- Compatible with VITA 65 and VITA 46.20
- Layer 2 and Layer 3 Management
- Up to 24 Fast/Gigabit Ethernet Ports
- Two 10-Gigabit Ethernet Ports
- Full Wire-speed Non-blocking Forwarding
- IP Routing Functionality
- Advanced Spanning Tree Algorithms (RSTP, MSTP)
- Access Control List (ACL) Support
- QoS Management
- IPv4/v6 Differentiated Services (DiffServ)/DSCP Traffic Prioritization
- Web and CLI Configuration and Monitoring
- 802.1Q-based VLAN Support
- Conduction and Air-Cooled Versions
- Vibration and Shock Resistant
- TM680 I/O Transition Module
C690 Features:
- Rugged 3U VPX Single-Slot Integrated Managed GbE and PCIe Gen2 Switch
- Configurations: 8 x 1000Base-BX/KX or 6 x 1000Base-BX/KX + 2 x 1000Base-T or 5 x 1000Base-T
- PCIe Gen2 Switch with 6x PCIe x4 Ports (default configuration)
- User Configurable up to 20 Ports
- Low Latency Cut-Through Architecture
- Transparent/Non-Transparent Support
- OpenVPX (VITA 65) Compliant
- Board Resources: Temperature Sensors, Elapsed Time Recorder, Real Time Clock, Power Monitor
- Built-In Test Support
- Conduction and Air-Cooled Versions
- 2LM Option per VITA 48.2
- Vibration and Shock Resistant
CM870 Features:
- Rugged/mil 3U VPX Carrier Board
- VPX Backplane Fabric Interface with Support for up to Four (4) PCIe x4 Ports per VITA 46.3 and 46.4
- PCI Express Revision 2.0
- Configurable for Switch Operation Supporting up to Four (4) PCIe Ports per VITA 46.20 Profile SLT3-SWH-4F-14.4.4
- PMC Site Supports 64-bit 66/133 Mhz PCI-X and 33/66 Mhz PCI
- XMC Site Supports PCIe x8
- PMC/XMC I/O Routed to VPX P2
- 64 PMC I/O Signals
- 35 Single Ended and 20 Differential XMC I/O Signals
- OpenVPX Compliant
- Conduction- and Air-cooled Versions
- Vibration and Shock Resistant
MicroTCA (MTCA) - AMC Modules
EM-SCLK Features:
- 12 synchronous Clock Outputs: 6x 2.7 GHz and 6x 100 MHz
(others on request) - Compatible with MicroTCA Systems
- Single-width AMC module format
- Full-size MTCA.1 front panel
- Operation in MCH slot or AMC slot possible
AMC599 Features:
- AMC ADC/DAC module, single-width, full-size or extended size
- Dual ADC 6.4 GSPS @ 12-bits or quad ADC 3.2 GSPS @ 12-bits utilizing the TI ADCDJ3200 (option for ADCJ2700 or ADCJ1600)
- Dual DAC (AD9162 or AD9164) 12 GSPS @ 16-bits
- Xilinx UltraScale™ XCKU115 FPGA
- Two banks of 64-bit wide and a single bank of 32-bit wide DDR-4 for a total of 20 GB
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Clock jitter cleaner
- IPMI 2.0 compliant
AMC529 Features:
- AMC DAC module, single-width, mid- or full-size
- Dual AD9129 DAC, 14-bit at 5.7 GSPS (2.85 GSPS direct RF synthesis)
- Conduction cooled version available
- Xilinx Virtex-7 690T FPGA in FFG-1761package
- Triple bank QDR-II+ memory (432 Mb total) and 1GB DDR3
- AMC ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
- AMC ports 12-15 and 17-20 optionally routed to the FPGA
- Internal, external or backplane clock with onboard wide band PLL
AMC594 Features:
- AMC ADC module, double-width, mid- or full-size
- 8-bit ADC at up to dual 56 GSPS
- 2 x 56 or 4 x 28 GSPS channels
- Xilinx UltraScale™ XCVU190 FPGA
- 16 GB of DDR-4 memory (2 banks of 64-bit)
- Calibration warning and over-range flags
- 15 GHz –3 dB analog input bandwidth
- Internal 14 GHz VCO/PLL per I/Q ADC pair
- Differential analog input: 1.0V PPD
- Zone 3 connector board-to-board interconnect for multi-module configurations
AMC534 Features:
- AMC 100GE module, single-width, mid- or full-size
- Altera Stratix V GT FPGA
- Dual QSFP28 (zQSFP+) ports
- Front panel port 0 at 100G, port 1 at up to 40G
- AMC ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
- On-board Freescale QorIQ PPC2040 with DDR3
Also available:
- AMC243 Dual High performance 40/50/100GbE Host Bus Adapter
AMC640 Features:
- Multi-Terabit storage capacity in a single module AMC form factor carrier
- AMC M.2 NVMe Host Bus Adapter with quad M.2 NVMe type SSD
- Allows for M.2 Type 2280 and/or 22110
- AMC.1 PCIe Gen3 x8 or dual x4 to the backplane
- PCIe x4 Gen3 to each M.2 Socket
- Single module, mid-size per AMC.0
- IPMI 2.0 compliant
Also available:
AMC628 Features:
- AMC Disk I/O Module, single-width, mid- or full-size
- RAID levels 0, 1, 5 and 6
- RAID spans 10, 50 and 60
- Dual Core ROC (RAID On Chip) at 800MHz per Core
- PCIe Gen3 x4 or x8 lanes
- Two mini-SAS-SFF-8644 x4 connectors (ASHD interconnect system)
- 6Gb/s throughput per port
- 1GB DDRIII cache (1333 MHz)
- Battery backed cache protection (option)
- Connect up to 240 SATA and/or SAS devices
- Up to 64 logical drive support
- Capacity expansion
AMC099 Features:
- AMC digital I/O module, single-width, compact-, mid- or full-size
- 24-channel isolated output
- Front panel I/O connectivity in a compact size AMC compliant form factor
- Input voltage from 10 V to 38 V with 45 V surge @ 500 ms
- Interrupt levels are user selectable
- AMC.1 compliant
FMC Modules
FMC220 Features:
- Analog Devices AD9234 dual 1 GSPS ADC
- The Analog inputs for the ADC are DC coupled
- Analog Devices AD9162/9164 6 GSPS RF DACSupported by DAQ Series™ data acquisition software
- Update rate up to 12 GSPS
- Up to 7.5 GHz in 2nd and 3rd Nyquist
- Fast frequency hopping (AD9164)
- FPGA Mezzanine Card (FMC) per VITA 57
- Excellent dynamic performance
FMC224 Features:
- FPGA mezzanine card (FMC) per VITA 57
- Quad port DAC39J84
- DAC 2.8 GSPS @ 16-bit
- JESD204B
- Independent 1x-16x Interpolation
- Independent complex mixers with 48-bit NCO/or +/-xFs/8
- Sinx/x correction filters
- Digital summation of independent complex signals
- On board wide band PLL
- Trig in/out
FMC108 Features:
- FPGA Mezzanine Card (FMC) per VITA-57
- Single module
- Two QSPF+ cages for 10GbE/SRIO/PCIE and Aurora
- Re-driver on both ports for a better signal quality
FMC257 Features:
- FMC Compact storage module up to 2 TB
- FMC with dual NVMe type Solid State Drive (SSD)
- High performance with dual PCIe Gen3 x4 interface
- Self-Encrypting Drive (SED) option
- 8 x RS-485/RS422 TX with speed up to 20 Mbps
- 8 x RS-485/RS422 RX with speed up to 52 Mbps
- 8 x Singled-ended +3.3V input or output
PMC / XMC / IndustryPack Modules
M706 Features:
- Single-wide PMC module
- 2x MIL-STD-1553B dual redundant channels
- 16x ARINC-429 receive channels and 8x ARINC-429 transmit channels with high/low-speed support
- 12x serial channels with complete UART operation for RS-232/422/485
- 8x opto-isolated discrete I/O channels
- 2x opto-Isolated CANbus 2.0B
- Front/rear I/O
- Hardware BIT capabilities
- Drivers for Windows™, Linux®, VxWorks®, INTEGRITY®
- Military level ruggedization
- Vibration and shock resistant
M596 Features:
- Single-width XMC
- PCIe x8 Gen 2.0 host interface
- AMD Radeon E8860 (Adelaar) GPU
- 6 independent graphics heads
- 2 GB GDDR5 memory
- Analog and digital video inputs and outputs
- Full video switching capabilities
- Video capture, overlay, resize and customized formats
- Full 2D/3D processing capabilities
- Universal VPWR 5V/12V
- Enhanced graphics & video support: DirectX® 11.1, Shader 5.0, OpenGL 4.2, OpenCL 1.2
- Operating system support: Windows™, Linux®, VxWorks®. INTEGRITY®
M577 Features:
- Single-width XMC
- PCIe x4 host interface
- Video Inputs: 7 x Composite supporting RS-170A (NTSC)/PAL, 3 x S-Video supporting NTSC/PAL, 2 x SDI supporting HD and SD resolutions
- Up to 4 x inputs available simultaneously
- Universal VPWR 5V/12V
- Low power consumption
- Windows®, Linux®, VxWorks® support
- Conduction and air-cooled versions
- Vibration and shock resistant
XMC401 Features:
- Dual 10 Gigabit Ethernet Switched Mezzanine Card
- Two 10 Gbit small form factor pluggable (SFP+) interfaces
- Outstanding Performance & CPU offload
- Intel® Niantic 82599ES 10GbE controller
- 8 Mbit serial flash device for BOOT ROMs
- XMC PCI Express® Gen 2.0 x8 interface
- Operating temperature 0°C to +55°C
- Software support for Windows and Linux
- Cost effective highly integrated single chip solution
IP-Relay 25 Features:
- IndustryPack with 25 reed relays 0.5 amp switching
- Fast switching
- Single pole
- Read back register
- Normally Open
- Independent relay drivers
- Operating temperature 0 to +55 °C (-25°C to +80°C optional)
CompactPCI Boards - Power Supplies
CP6930 Features:
- 6U CompactPCI switch 4TE/8TE, PICMG 2.16 compliant
- Leading edge technology based on BCM56626 chip set
- 6x 10GbE via SFP+, 2x 1GbE via SFP
- 24x Gigabit Ethernet ports according PICMG2.16
- Non-blocking layer 2 & 3 switching & routing, IPv6 compliant
- Fully managed
- DHCP server and boot media support
- Hot swap, IPMI
- Comprehensive firmware package
CP6105X Features:
- 6U XMC/PMC carrier for high-speed CompactPCI®
- System data throughput via PCIe 3.0 x4/x8, PICMG2.20 based
- Maximum bandwidth by data stream conversion
- Easy handling: access via front cutouts
- Operating temperature -40°C to +70°C
CM900 Features:
- Rugged 3U CompactPCI carrier board
- Transparent and PrPMC versions
- CompactPCI interface supports 32-bit @ 66 MHz
- PMC interface supports 64-bit @ 66 MHz through PCI-PCI Bridge
- PMC Connectors are IEEE 1386.1 compliant, J4 is wired as per PICMG 2.3 Rev.1.0
- Front panel area for PMC I/O
- All 64 PMC I/O pins routed to J2 connector
- Conduction and air cooled versions
- Three ruggedization levels
EM-P328-CC Features:
- 6U Form Factor
- Suitable for VME, CompactPCI, and VPX Systems
- 500 Watts Outputs Power
- >85% Efficiency
- 18 - 35 Vdc Input Range
- MIL-STD-704A/D/E/F and 1275
- EMI/RFI Filter for MIL-STD-461
- Input Transient Protection
- Input Reverse Polarity Protection
- Holdup Time
- Output Over/Undervoltage and Short Circuit Protections
- ~ACFAIL, ~SYSRST and ~SYSFAIL Control Signals
- Input/Output and Chassis Isolation
- Thermal Shutdown (with Override on request)
- External ON/OFF Control, DC Fan Output Drive and Control
- Internal BIT Status and Alarms for Voltages, Currents & Temperatures
- Metric screws for chassis wall (captive M3) and wedgelocks
- RoHS II compliant variant available
VME Boards - Power Supplies
C437 Features:
- Rugged 6U single-slot VME I/O board, VME64x compliant
- 4x opto-isolated differential 16-bit A/D input channels
- 4x opto-isolated differential 16-bit D/A output channels
- 2x +10 Vdc and 2x -10 Vdc voltage reference source sets
- Opto-isolated discrete I/O channels: 45x GND/OPEN inputs, 10x 28V/OPEN inputs, 5x 28V/GND inputs, 2x 5V differential RS-422 inputs, 41x GND/OPEN discrete outputs
- 16x ARINC-429 inputs, 8x ARINC-429 outputs, high or low speed
- Audio announcement system
- All I/O signals routed to the VME P2 & P0 connectors
- On-board BIT support (ref voltages and loopbacks)
- Conduction and air cooled versions
- Vibration and shock resistant
- 0 to 55°C operating (commercial), -40 to 85°C available (military)
EM-P328-CC Features:
- 6U Form Factor
- Suitable for VME, CompactPCI, and VPX Systems
- 500 Watts Outputs Power
- >85% Efficiency
- 18 - 35 Vdc Input Range
- MIL-STD-704A/D/E/F and 1275
- EMI/RFI Filter for MIL-STD-461
- Input Transient Protection
- Input Reverse Polarity Protection
- Holdup Time
- Output Over/Undervoltage and Short Circuit Protections
- ~ACFAIL, ~SYSRST and ~SYSFAIL Control Signals
- Input/Output and Chassis Isolation
- Thermal Shutdown (with Override on request)
- External ON/OFF Control, DC Fan Output Drive and Control
- Internal BIT Status and Alarms for Voltages, Currents & Temperatures
- Metric screws for chassis wall (captive M3) and wedgelocks
- RoHS II compliant variant available
AdvancedTCA Blades
ATC806 Features:
- 40G or 10G ATCA switch
- Compliant to PICMG 3.1 specifications
- Scalable throughput
- based on desired performance level
- Managed layer 3 software
- Dual mid-size AMC slots
- Octal 10/100/1000 Ethernet, 1 GbE, and 1 RS-232 port via RJ-45
- Utilizes VadaTech’s proven IPMI management controller
ATC605 Features:
- Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network File System (NFS) or Common Internet File System (CIFS)
- Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
- Fully compliant with the IETF RFC3270 and RFC4171 RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
- Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
- RAID spans 10, 50 and 60
- Battery pack option to prevent data loss
- Utilizes VadaTech’s proven IPMI Management Controller
Also available:
- ATC600 ATCA Storage Blade with RAID and iSCSI with removable storage carrier