Zum Hauptinhalt springen

I/O Module


AMC594 Features: 

  • AMC ADC module, double-width, mid- or full-size
  • 8-bit ADC at up to dual 56 GSPS
  • 2 x 56 or 4 x 28 GSPS channels
  • Xilinx UltraScale™ XCVU190 FPGA
  • 16 GB of DDR-4 memory (2 banks of 64-bit)
  • Calibration warning and over-range flags
  • 15 GHz –3 dB analog input bandwidth
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1.0V PPD
  • Zone 3 connector board-to-board interconnect for multi-module configurations


AMC599 Features: 

  • AMC ADC/DAC module, single-width, full-size or extended size
  • Dual ADC 6.4 GSPS @ 12-bits or quad ADC 3.2 GSPS @ 12-bits utilizing the TI ADCDJ3200 (option for ADCJ2700 or ADCJ1600)
  • Dual DAC (AD9162 or AD9164) 12 GSPS @ 16-bits
  • Xilinx UltraScale™ XCKU115 FPGA
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR-4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Clock jitter cleaner
  • IPMI 2.0 compliant


AMC529 Features: 

  • AMC DAC module, single-width, mid- or full-size
  • Dual AD9129 DAC, 14-bit at 5.7 GSPS (2.85 GSPS direct RF synthesis)
  • Conduction cooled version available
  • Xilinx Virtex-7 690T FPGA in FFG-1761package
  • Triple bank QDR-II+ memory (432 Mb total) and 1GB DDR3
  • AMC ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC ports 12-15 and 17-20 optionally routed to the FPGA
  • Internal, external or backplane clock with onboard wide band PLL


AMC534 Features: 

  • AMC 100GE module, single-width, mid- or full-size
  • Altera Stratix V GT FPGA
  • Dual zQSFP+ ports
  • Front panel port 0 at 100G, port 1 at up to 40G
  • AMC ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
  • On-board Freescale QorIQ PPC2040 with DDR3


AMC099 Features: 

  • AMC digital I/O module, single-width, compact-, mid- or full-size
  • 24-channel isolated output
  • Front panel I/O connectivity in a compact size AMC compliant form factor
  • Input voltage from 10 V to 38 V with 45 V surge @ 500 ms
  • Interrupt levels are user selectable
  • AMC.1 compliant


AMC628 Features: 

  • AMC Disk I/O Module, single-width, mid- or full-size
  • RAID levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Dual Core ROC (RAID On Chip) at 800MHz per Core
  • PCIe Gen3 x4 or x8 lanes
  • Two mini-SAS-SFF-8644 x4 connectors (ASHD interconnect system)
  • 6Gb/s throughput per port
  • 1GB DDRIII cache (1333 MHz)
  • Battery backed cache protection (option)
  • Connect up to 240 SATA and/or SAS devices
  • Up to 64 logical drive support
  • Capacity expansion



VPX599 Features: 

  • 3U VPX board per VITA-46
  • Dual ADC 6.4 GSPS @ 12-bits or quad ADC @ 3.2 GSPS @ 12-bits utilizing the TI ADCDJ3200 (option for ADCJ2700 or ADCJ1600)
  • Dual DAC (AD9162 or AD9164) 12 GSPS @ 16-bits
  • Xilinx UltraScale™ XCKU115 FPGA
  • 16 GB DDR-4 64-bit wide
  • High-performance clock jitter cleaner
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc.are FPGA programmable
  • VHDL reference design with source code


VPX516 Features: 

  • 3U VPX FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46/57
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package
  • 2.5 GB of DDR3 Memory
  • High-performance clock jitter cleaner
  • Compatible with VadaTech and 3rd party FMCs
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc.are FPGA programmable
  • VHDL reference design with source code
  • Health Management through dedicated Processor


VX3920 Features: 

  • L2/L3 non blocking 10G/40G switch
  • 3U Open VPX, MOD3-SWH-2F24U module
  • Air-cooled - backplane: 22x 10GBase-KR, 1x 10/100/1000Base-T user configurable front panel or backplane. Front Panel: 2x 10G SFP+
  • Conduction-cooled - backplane: 24x 10GBase-KR or 6x 40GBase-KR4 or, 22x 10GBase-KR + 1x 10/100/1000Base-T
  • Front panel (air-cooled only): 2x SFP+, 2x RJ45, 1x RJ11 (serial)
  • Supports: VLAN, link aggregation, spanning tree
  • QoS, flow control
  • GRVP, GMRP function managed, port mirroring
  • Out of band management
  • 5V only design, 45W maximum


C680 Features: 

  • Rugged 3U VPX Single-Slot Ethernet Switchh
  • Compatible with VITA 65 and VITA 46.20
  • Layer 2 and Layer 3 Management
  • Up to 24 Fast/Gigabit Ethernet Ports
  • Two 10-Gigabit Ethernet Ports
  • Full Wire-speed Non-blocking Forwarding
  • IP Routing Functionality
  • Advanced Spanning Tree Algorithms (RSTP, MSTP)
  • Access Control List (ACL) Support
  • QoS Management
  • IPv4/v6 Differentiated Services (DiffServ)/DSCP Traffic Prioritization
  • Web and CLI Configuration and Monitoring
  • 802.1Q-based VLAN Support
  • Conduction and Air-Cooled Versions
  • Vibration and Shock Resistant
  • TM680 I/O Transition Module


C690 Features: 

  • Rugged 3U VPX Single-Slot Integrated Managed GbE and PCIe Gen2 Switch
  • Configurations: 8 x 1000Base-BX/KX or 6 x 1000Base-BX/KX + 2 x 1000Base-T or 5 x 1000Base-T
  • PCIe Gen2 Switch with 6x PCIe x4 Ports (default configuration)
  • User Configurable up to 20 Ports
  • Low Latency Cut-Through Architecture
  • Transparent/Non-Transparent Support
  • OpenVPX (VITA 65) Compliant
  • Board Resources: Temperature Sensors, Elapsed Time Recorder, Real Time Clock, Power Monitor
  • Built-In Test Support
  • Conduction and Air-Cooled Versions
  • 2LM Option per VITA 48.2
  • Vibration and Shock Resistant


CM870 Features: 

  • Rugged/mil 3U VPX Carrier Board
  • VPX Backplane Fabric Interface with Support for up to Four (4)  PCIe x4 Ports per VITA 46.3 and 46.4
  • PCI Express Revision 2.0
  • Configurable for Switch Operation Supporting up to Four (4) PCIe Ports per VITA 46.20 Profile SLT3-SWH-4F-14.4.4
  • PMC Site Supports 64-bit 66/133 Mhz PCI-X and 33/66 Mhz PCI
  • XMC Site Supports PCIe x8
  • PMC/XMC I/O Routed to VPX P2
  • 64 PMC I/O Signals
  • 35 Single Ended and 20 Differential XMC I/O Signals
  • OpenVPX Compliant
  • Conduction- and Air-cooled Versions
  • Vibration and Shock Resistant



FMC220 Features: 

  • Analog Devices AD9234 dual 1 GSPS ADC
  • The Analog inputs for the ADC are DC coupled
  • Analog Devices AD9162/9164 6 GSPS RF DACSupported by DAQ Series™ data acquisition software
    • Update rate up to 12 GSPS
    • Up to 7.5 GHz in 2nd and 3rd Nyquist
    • Fast frequency hopping (AD9164)
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Excellent dynamic performance


FMC224 Features: 

  • FPGA mezzanine card (FMC) per VITA 57
  • Quad port DAC39J84
    • DAC 2.8 GSPS @ 16-bit
    • JESD204B
    • Independent 1x-16x Interpolation
    • Independent complex mixers with 48-bit NCO/or +/-xFs/8
    • Sinx/x correction filters
    • Digital summation of independent complex signals
  • On board wide band PLL
  • Trig in/out


FMC108 Features: 

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Two QSPF+ cages for 10GbE/SRIO/PCIE and Aurora
  • Re-driver on both ports for a better signal quality


PMC / XMC / IndustryPack

M706 Features:

  • Single-wide PMC module
  • 2x MIL-STD-1553B dual redundant channels
  • 16x ARINC-429 receive channels and 8x ARINC-429 transmit channels with high/low-speed support
  • 12x serial channels with complete UART operation for RS-232/422/485
  • 8x opto-isolated discrete I/O channels
  • 2x opto-Isolated CANbus 2.0B
  • Front/rear I/O
  • Hardware BIT capabilities
  • Drivers for Windows™, Linux®, VxWorks®, INTEGRITY®
  • Military level ruggedization
  • Vibration and shock resistant


M596 Features:

  • Single-width XMC
  • PCIe x8 Gen 2.0 host interface
  • AMD Radeon E8860 (Adelaar) GPU
  • 6 independent graphics heads
  • 2 GB GDDR5 memory
  • Analog and digital video inputs and outputs
  • Full video switching capabilities
  • Video capture, overlay, resize and customized formats
  • Full 2D/3D processing capabilities
  • Universal VPWR 5V/12V
  • Enhanced graphics & video support: DirectX® 11.1, Shader 5.0, OpenGL 4.2, OpenCL 1.2
  • Operating system support: Windows™, Linux®, VxWorks®. INTEGRITY®


M577 Features:

  • Single-width XMC
  • PCIe x4 host interface
  • Video Inputs: 7 x Composite supporting RS-170A (NTSC)/PAL, 3 x S-Video supporting NTSC/PAL, 2 x SDI supporting HD and SD resolutions
  • Up to 4 x inputs available simultaneously
  • Universal VPWR 5V/12V
  • Low power consumption
  • Windows®, Linux®, VxWorks® support
  • Conduction and air-cooled versions
  • Vibration and shock resistant


XMC401 Features:

  • Dual 10 Gigabit Ethernet Switched Mezzanine Card
  • Two 10 Gbit small form factor pluggable (SFP+) interfaces
  • Outstanding Performance & CPU offload
  • Intel® Niantic 82599ES 10GbE controller
  • 8 Mbit serial flash device for BOOT ROMs
  • XMC PCI Express® Gen 2.0 x8 interface
  • Operating temperature 0°C to +55°C
  • Software support for Windows and Linux
  • Cost effective highly integrated single chip solution


IP-Relay 25 Features:

  • IndustryPack with 25 reed relays 0.5 amp switching
  • Fast switching
  • Single pole
  • Read back register
  • Normally Open
  • Independent relay drivers
  • Operating temperature 0 to +55 °C (-25°C to +80°C optional)



CP6930 Features: 

  • 6U CompactPCI switch 4TE/8TE, PICMG 2.16 compliant
  • Leading edge technology based on BCM56626 chip set
  • 6x 10GbE via SFP+, 2x 1GbE via SFP
  • 24x Gigabit Ethernet ports according PICMG2.16
  • Non-blocking layer 2 & 3 switching & routing, IPv6 compliant
  • Fully managed
  • DHCP server and boot media support
  • Hot swap, IPMI
  • Comprehensive firmware package


CP6105X Features:

  • 6U XMC/PMC carrier for high-speed CompactPCI®
  • System data throughput via PCIe 3.0 x4/x8, PICMG2.20 based
  • Maximum bandwidth by data stream conversion
  • Easy handling: access via front cutouts
  • Operating temperature -40°C to +70°C


CM900 Features: 

  • Rugged 3U CompactPCI carrier board
  • Transparent and PrPMC versions
  • CompactPCI interface supports 32-bit @ 66 MHz
  • PMC interface supports 64-bit @ 66 MHz through PCI-PCI Bridge
  • PMC Connectors are IEEE 1386.1 compliant, J4 is wired as per PICMG 2.3 Rev.1.0
  • Front panel area for PMC I/O
  • All 64 PMC I/O pins routed to J2 connector
  • Conduction and air cooled versions
  • Three ruggedization levels



C437 Features: 

  • Rugged 6U single-slot VME I/O board, VME64x compliant
  • 4x opto-isolated differential 16-bit A/D input channels
  • 4x opto-isolated differential 16-bit D/A output channels
  • 2x +10 Vdc and 2x -10 Vdc voltage reference source sets
  • Opto-isolated discrete I/O channels: 45x GND/OPEN inputs, 10x 28V/OPEN inputs, 5x 28V/GND inputs, 2x 5V differential RS-422 inputs, 41x GND/OPEN discrete outputs
  • 16x ARINC-429 inputs, 8x ARINC-429 outputs, high or low speed
  • Audio announcement system
  • All I/O signals routed to the VME P2 & P0 connectors
  • On-board BIT support (ref voltages and loopbacks)
  • Conduction and air cooled versions
  • Vibration and shock resistant
  • 0 to 55°C operating (commercial),  -40 to 85°C available (military)



ATC806 Features: 

  • 40G or 10G ATCA switch
  • Compliant to PICMG 3.1 specifications
  • Scalable throughput
    • based on desired performance level
  • Managed layer 3 software
  • Dual mid-size AMC slots
  • Octal 10/100/1000 Ethernet, 1 GbE, and 1 RS-232 port via RJ-45
  • Utilizes VadaTech’s proven IPMI management controller